The Kayak Club

Kayaks (Inuktitut: qajaq, Inuktitut syllabics: ᖃᔭᖅ) were originally developed by indigenous people living in the Arctic regions, who used the boats to hunt on inland lakes, rivers and the coastal waters of the Arctic Ocean, North Atlantic, Bering Sea and North Pacific oceans. These first kayaks were constructed from stitched animal skins such as seal stretched over a wooden frame made from collected driftwood, as many of the areas of their construction were treeless. Archaeologists have found evidence indicating that kayaks are at least 4000 years old.^[1] The oldest still existing kayaks are exhibited in the North America department of the State Museum of Ethnology in Munich.^[2]

Though the term “kayak” is now used broadly for this class of boat, native people made many different types of boat for different purposes. The baidarka developed by indigenous cultures in Alaska was also made in double or triple cockpit designs, and was used for hunting and transporting passengers or goods. An umiak is a large open sea canoe, ranging from 17 feet to 30 feet, made with seal skins and wood. It was originally paddled with single bladed paddles and typically had more than one paddler.

The word “kayak” means “man’s boat” or “hunter’s boat”, and native kayaks were a very personal craft, built by the man who would use them (with assistance from his wife, who would sew the skins) fitting his measures, for maximum maneuverability. A special skin jacket, Tuilik, was then laced to the kayak, creating a waterproof seal. This made the eskimo roll the preferred method of regaining posture after turning upside down (from the kayaking point of view, it’s not a capsize until you come out of the boat), especially as few Eskimos could swim; their waters are too cold for a swimmer to survive for very long.^[3]

The modern version of a tuilik is a spraydeck made of waterproof synthetic stretchy enough to fit tightly around the cockpit rim and body of the kayaker, which can however be released rapidly from the cockpit to permit easy exit from the boat.

The builder used found materials and anthropomorphic measurements, using his own body, to create a kayak conforming closely to his own body. For example: the length was typically three times the span of his outstretched arms. The width at the cockpit was the width of the builder’s hips plus two fists (and sometimes less). The typical depth was his fist plus the outstretched thumb (hitch hiker). Thus typical dimensions were about 17 feet long by 20-22 inches wide by 7 inches deep. This measurement style confounded early European explorers who tried to duplicate the kayak because each kayak was a little different.

Traditional kayaks encompass three types of boat: Baidarkas, from the Alaskan & Aleutian seas, the oldest design, whose rounded shape and numerous chines give them an almost Blimp-like appearance; West Greenland kayaks, with fewer chines and a more angular shape, with gunwales rising to a point at the bow and stern; and East Greenland kayaks that appear similar to the West Greenland style, but are often more snugly fitted to the paddler and possess a steeper angle between gunwale and stem which lend maneuverability.

Most of the Eskimo peoples from the Aleutian Island eastward to Greenland relied on the kayak for hunting a variety of prey — primarily seals, though whales and caribou were important in some areas. Skin on frame kayaks are still being used for hunting by Inuit people in Greenland. In other parts of the world homebuilders are continuing the tradition of skin on frame kayaks albeit with modern skins of canvas or synthetic fabric.

Contemporary kayaks trace their origins primarily to the native boats of Alaska, northern Canada, and Southwest Greenland. Wooden kayaks and fabric kayaks on wooden frames (such as the Klepper) dominated the market up until 1950s, when fiberglass boats were first introduced. Rotomolded plastic kayaks first appeared in 1973. The development of plastic kayaks arguably initiated the developed of freestyle kayaking as we see it today, since plastic boats could be made smaller, stronger and more resilient than those made of other materials.